Range Of Encoders

AC 110-BiSS/SSI

Same electrical performance as ACURO industry AC 36 and AC 58 versions Robust bearings for long life Hollow shaft up to 50 mm Absolute singleturn Revolution 11-17 Bit SSI or BiSS - Interface Optional: Sine-Cosine 4096 increments DC 5 or 10 - 30 V Integrated diagnostic system  Resolution:  Singleturn 10 to 17 Bit  Shaft diameter:  up to 50 mm  Protection class:  IP50 or IP64  Housing diameter:  110 mm  Supply voltage:  DC 5 V -5% / +10% or DC 10-30 V  Connection:  Cable

AC 58-BiSS/SSI (Solid shaft)

Compact design: 50mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status information Use of sine/ cosine signals for fast control task possible Control input: Direction Resolution up to 29 Bit  Resolution:  Singleturn 10 to 17 Bit, Multiturn up to 29 Bit  Shaft diameter:  Solid shaft 6 mm, 9.52 mm, 10 mm, 12 mm  Flange:  synchro flange; clamping flange; square flange  Protection class:  IP 64 or IP 67  Housing diameter:  58 mm  Supply voltage:  DC 10–30 V or DC 5 V, -5% / +10%  Connection:  Cable, Conin or M12

AD 36-BiSS/SSI

For brushless servo motors Resolver size 15 compatible Through hollow shaft 8 mm 19 Bit Singleturn + 12 Bit Multiturn + 120°C operating temperature 10.000 rpm continuous operation Geared optical multiturn SSI or BiSS interface Sinewave 1 Vpp Bandwidth 500kHz  Resolution:  BiSS: up to 31 Bit SSI: up to 25 Bit  Shaft diameter:  8 mm  Protection class:  IP 40  Housing diameter:  37,5 mm  Supply voltage:  DC 5 V, -5%/ +10% oder 10 - 30 V

AD 58-BiSS/SSI

For brushless servo motors All-digital and highspeed + 120°C operating temperature 10.000 rpm continuous operation Geared optical multiturn SSI or BiSS interface Option Sinewave 1 Vpp: Harmonic distortion less than 1% Bandwidth 500kHz  Resolution:  BiSS: up to 34 Bit SSI:up to 25 Bit  Shaft diameter:  cone 10 mm  Flange:  Hubshaft with tether  Protection class:  IP 40  Housing diameter:  58 mm  Supply voltage:  5 V, -5 % /+10%

E9
	Ideal for position and speed sensing in small machines and actuators Low power standby mode is ideal for battery powered devices Operating frequency to 200 kHz Resolution to 512 lines/rev  Number of Pulses:  100; 144; 200; 256; 300; 360; 500; 512  Shaft diameter:  1,5 mm 2,0 mm 2,5 mm 3,0 mm 4,0 mm 1,125" 0,156"  Supply voltage:  DC 5 V ±10 %

Housed Resolvers Series R25
	Rugged housing with IP 65 Able to withstand high shock and vibration levels Impervious to most industrial contaminant and temperature extremes High temperature up to 125°C Flange- and servo-mount styles  Shaft diameter:  0.3745"  Protection class:  IP-65

Housed Resolvers Series R11
	Brushless construction Maintenance free Able to withstand high shock and vibration levels Impervious to most industrial contaminant and temperature extremes High temperature up to 115°C  Shaft diameter:  3mm max.  Housing diameter:  27mm

F10
	Compact hollowshaft motor encoder, ideal for BLDC, DC-Servo and Stepper feedback Resolver compatible mounting Resolution up to 2 048 ppr Operating temperature up to 120 °C Frequency response to 300 kHz Mounting depth 22.4 mm  Number of Pulses:  1024; 2048  Shaft diameter:  6 mm  Flange:  Servo flange  Housing diameter:  31,7 mm max.  Supply voltage:  5 V ±10 % DC

F14

Compact hollowshaft motor encoder, ideal for BLDC, DC-Servo and Stepper feedback Incremental & commutation Phased Array Technology Up to 5 000 ppr Frequency response to 500 kHz Operating temperature up to 120°C Trough hollow shaft up to diameter 8 mm Stator coupling External diameter 40 mm Cable plug-in radial/axial  Number of Pulses:  200; 400; 500; 1000; 1024; 2000; 2048; 2500; 4096; 5000  Shaft diameter:  6,8 mm 1⁄ 4"  Protection class:  IP 40 (with cover)  Supply voltage:  5 V ±10%

F15
	Compact hollowshaft motor encoder, ideal for BLDC, DC-Servo and Stepper feedback Resolver compatible mounting Resolution up to 2 048 ppr Operating temperature up to 120 °C Frequency response to 300 kHz Mounting depth 22.4 mm  Number of Pulses:  1024; 2048  Shaft diameter:  9,52 mm  Flange:  Servo flange  Housing diameter:  36,8 mm max.  Supply voltage:  5 V ±10 % DC

F18

Compact hollowshaft motor encoder, ideal for BLDC, DC-Servo and Stepper feedback Incremental & commutation Phased Array Technology Up to 10 000 ppr Frequenquy response to 500 kHz Operating temperature up to 120°C Trough hollow shaft up to diameter 12.7 mm Stator coupling External diameter 50 mm Cable plug-in radial/axial  Number of Pulses:  500; 512; 1000; 1024; 200; 2048; 2500; 4096; 5000; 8192; 10000  Shaft diameter:  6, 8, 10, 12 mm 1⁄4”, 3⁄ 9”, 7⁄ 16”, 1⁄ 2”  Protection class:  IP 40 (with cover)  Supply voltage:  5 V ±10%

F21
	Compact hollowshaft motor encoder, ideal for BLDC, DC-Servo and Stepper feedback Resolver compatible mounting Resolution up to 2048 ppr Operating temperature up to 120 °C Frequency response to 300 kHz Mounting depth 22.4 mm  Number of Pulses:  1024; 2048  Shaft diameter:  12,7 mm  Flange:  Servo flange  Housing diameter:  53 mm max.  Supply voltage:  5 V ±10 % DC

M14
	Ideal economical feedback device for servo and step motors Short axial length and compact 1.5 inch diameter Easy "snap-on" installation High resolution to 1024 lines/rev and 200 kHz bandwidth Drop-in replacement for HP 5540 CE-qualified  Number of Pulses:  100; 400; 500; 512; 1000; 1024  Shaft diameter:  3,0 bis 8,0 mm  Supply voltage:  5 VDC ±10 %

M15

Incremental + commutation Practically no speed limitation, since up to 12 000 RPM Very good dynamic behaviour through low moment of inertia of rotor and its minimal influence on the motor Very good drive stiffness since no coupling is used Compact size Excellent price-performance ratio Increased temperature range, -40 to + 120°C Incomparable shaft play tolerances (to 0.7 mm axial) Better frequency, 200 KHz Flexibility, since the user can integrate in all actual motor sizes Simple mounting and adjustment since encoders come aligned and gapped  Number of Pulses:  200; 400; 500; 1000; 1024  Shaft diameter:  6 mm 8 mm 10 mm 3,18 mm (1⁄ 8”) 4,76 mm (3⁄ 16”) 6,35 mm (1⁄ 4”) 9,52 mm (3⁄ 8”)  Protection class:  IP 40 (version cable) IP 30 (version dual row connector)  Housing diameter:  39.6 mm with cover 37.1 mm without cover  Supply voltage:  5 or 12 V DC ±10 % (SELV)

M21

Incremental + commutation Modular hollow shaft encoder as feedback for Brushless DC (BLDC) Servos, DC Servos and Step Motors Outside diameter 53 mm (2.1“) Hub diameters 6 ... 12 mm (1¼4” ... 1¼2”) Height 20 mm (0,8”) Resolution 500 ... 2048 lines Standard Operating temperature -40 ... +120 °C Maximum speed 12000 RPM Easy installation and alignment  Number of Pulses:  500; 1000; 1024; 2000; 2048  Shaft diameter:  6 mm 8 mm 10 mm 12 mm 6,35 mm (1⁄ 4”) 9,52 mm (3⁄ 8”) 11,11 mm (7⁄ 16 ‘’) 12,7 mm (1/2”)  Protection class:  IP 40 when mounted with cover  Housing diameter:  53 mm with cover 51 mm without cover  Supply voltage:  5 oder 12 V DC ±10 % (SELV)

M9 Einbau
	Ideal for position and speed sensing in small machines and actuators 200 kHz operating frequency Resolution to 512 lines/rev  Number of Pulses:  100; 144; 200; 256; 300; 360; 500; 512  Shaft diameter:  1,5 mm 2,0 mm 2,5 mm 3,0 mm 4,0 mm 1,125" 0,156"  Supply voltage:  DC 5 V ±10 %

RI 36-H

miniature industry encoder for high number of pulses short mounting length easy mounting procedure Application e.g.: - Motors - Machine tools - Packaging Machines - Robots - Automated SMD equipment  Number of Pulses:  5 ... 3600  Shaft diameter:  4 mm 6 mm 8 mm 10 mm  Protection class:  housing IP 64, bearings IP 64  Supply voltage:  with RS 422 (R, T): DC 5V± 10% (SELV) with push-pull (K, I): DC 10 - 30 V

RI 58-D

Flexible hollow shaft design up to diameter 14mm Short overall length Easy installation by means of clamping shaft or blind shaft Application e.g.: - actuators - length measuring machines - motors Operating temperature up to 100 °C (RI 58 TD) Various shaft versions: Mounting code E = Blind shaft (not through) Mounting code F = Clamping shaft (not through) Mounting code D = Clamping shaft (solid shaft)  Number of Pulses:  1 ... 5000  Shaft diameter:  10 mm 12 mm 14 mm (not through)  Protection class:  E, F: housing IP 65, bearing IP 64 D: housing IP 64, bearing IP 64  Supply voltage:  with RS 422 + Sense (T): DC 5V± 10% (SELV) with RS 422 + Alarm (R): DC 5V± 10 % or DC 10 - 30 V with push-pull (K, I): DC 10 - 30 V

RI 58-H

Through shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Application e.g.: - textile machines - motors - drives - copiers  Number of Pulses:  1 ... 5000  Shaft diameter:  10 mm 12 mm  Protection class:  housing IP 64, bearings IP 64  Supply voltage:  with RS 422 + Sense (T): DC 5V± 10% with RS 422 + Alarm (R): DC 5V± 10 % or DC 10 - 30 V with push-pull (K, I): DC 10 - 30 V

RI 76-TD

Through shaft with up to diameter 42mm Short overall length with an outside diameter of only 76mm Easy installation by means of clamping ring Operating temperature up to 100 °C Application e.g.: - motors - printing machines - lifts  Number of Pulses:  50 ... 10000  Shaft diameter:  15 ... 42 mm 5/8  Protection class:  housing IP 50, bearings IP 40 Option: housing IP 65, bearing IP 64  Supply voltage:  with RS 422 +Sense (T): DC 5V± 10% (SELV) with RS 422 +Alarm (R): DC 5V ±10 % or DC 10 - 30V with push-pull (K, I): DC 10 - 30V

RI 80-E
	Incremental Output 30...45 mm hollow shaft Rugged mechanical design Unbreakable disc Integrated diagnostic system Wide voltage range 5 … 30 V  Number of Pulses:  1024:2048;4096  Shaft diameter:  30 mm 45 mm  Protection class:  IP 50 or IP 64  Supply voltage:  DC 5V±10% or DC 5-30V

RIS 58-H

Harmonic distortion less than 1% Extended temperature range, -40 ° to +100 °C 500 kHz sine-wave incremental signal frequency response All accessible components, including the electrical connections, are resistant to common industrial coolants and lubricants Self-monitoring and error compensation Secure against short-circuit and overload Hot plug Unit is protected against overloads of 10 V/50 ms 10 or 12 mm one sided open hub shaft with stator coupling  Number of Pulses:  1000;1024;2048  Shaft diameter:  10 mm 12 mm Hohlwelle  Flange:  Hubshaft with tether  Protection class:  bearings IP 64 housing IP 65  Supply voltage:  DC 5 V ±10 % (SELV)

S21

Wide operating temperature range of –15 °C up to +120 °C, therefore optimum use of motor capacity High limiting frequency with excellent signal quality, allowing highest peak speeds and reduced non-productive time wastage Excellent immunity to interference (EN 61000-4-4, Class 4) High functional safety due to signal control and system monitoring (under-voltage, pollution, disc damage, end of LED service life) High signal quality through control and error compensation  Number of Pulses:  2048  Shaft diameter:  10 mm  Protection class:  IP 40  Supply voltage:  DC 5 V ±10 % (SELV)